San Antonio Asphalt Paving Services
FAQS
Residential Driveway Paving
How much does it cost to pave an asphalt driveway in San Antonio?
Driveway paving costs vary based on the total square footage, necessary excavation work, and base material preparation. For a standard residential driveway in the greater San Antonio and New Braunfels areas, property owners typically spend between $4,000 and $10,000 for a professional, long-lasting installation.
Is asphalt or concrete better for driveways in South Central Texas?
Both options perform well, but asphalt is highly favored for its flexibility under intense Texas heat, which helps prevent the severe cracking common in rigid concrete. Asphalt is also significantly cheaper to install upfront and can be easily resurfaced to look brand new decades later.
How long does a new asphalt driveway last in the Boerne area?
A professionally installed asphalt driveway with a solid aggregate base lasts between 15 and 25 years. Environmental factors like heavy direct UV exposure and poor water drainage can accelerate wear, but regular preventative maintenance greatly extends its lifespan.
Commercial Parking Lots & Roadways
What is the best way to repair potholes in a commercial parking lot near Schertz?
The most effective method is a professional asphalt patch. Technicians saw-cut the damaged section, remove the deteriorated debris, repair the sub-base, and fill it with fresh, hot-mix asphalt before compacting it flush with the surrounding pavement to eliminate liability hazards.
How often should a commercial parking lot be resurfaced?
Commercial properties with high traffic volume generally require asphalt resurfacing (or an overlay) every 10 to 15 years. This process removes the top layer of damaged pavement via milling and applies a fresh asphalt layer over the stable, existing foundation.
What commercial paving services are required for ADA compliance in Texas?
To meet strict Americans with Disabilities Act (ADA) requirements, commercial parking lots must feature designated accessible parking stalls, specific pavement striping widths, bright blue handicap symbols, and clearly marked, unobstructed access aisles leading toward building entrances.
Asphalt Maintenance & Protection
When should you apply sealcoating to a new asphalt driveway in Seguin?
New asphalt needs time to cure and release its manufacturing oils. It is highly recommended to wait 6 to 12 months after the initial installation before applying the first layer of professional sealcoat, followed by resealing every 2 to 3 years thereafter.
Why is crack sealing important before a driveway gets sealcoated?
Sealcoating only protects the surface from oxidation and light moisture; it cannot bridge deep structural openings. Filling open cracks with hot-pour rubberized sealant prevents heavy rainwater from seeping into the sub-grade base, which prevents costly foundational failures and potholes.
How long do cars need to stay off a freshly sealcoated driveway?
Vehicles should stay off a newly sealcoated surface for at least 24 to 48 hours to ensure the material cures completely. Foot traffic is typically safe after 4 to 8 hours, though high humidity or shade can slow down drying times across South Texas.